Overview

The IOTA DLS-45/IQ4 is a 12v 45 Amp converter/charger power supply with an integrated IQ4 smart controller. The DLS-45/IQ4 can be used as a charger/converter to charge a battery or as a power supply with or without batteries.

The IOTA DLS-45/IQ4 features tight line/load control, allowing the DLS series units to convert AC power into steady and clean DC power. By preventing erratic DC output, the DLS-45/IQ4 is suitable for powering sensitive equipment and prevents damage or equipment shutdown from unexpected overloads.

The DLS-45/IQ4 integrated IQ4 module delivers a 4-stage smart charging profile, which includes a Bulk, Absorption, Float, and Equalization stage:

The DLS-45/IQ4’s Bulk stage outputs 14.8v at the charger's full-rated output to reduce charging time. The charger then progresses to the Absorption stage, where it lowers the output voltage to 14.2 volts for a controlled period to ensure a full and complete charge.

Once fully charged, the IOTA DLS-45/IQ4 switches to a Float stage, outputting 13.6 volts to trickle charge and maintain the battery. This stage is designed to maintain the battery’s fully charged state while avoiding overcharging and gassing of the battery pack.

The final Equalization stage is only initiated if the charger is in float mode for seven days. At that point, the charger will re-initiate the charge sequence to dissolve sulfation and avoid stratification.

The IOTA DLS series converter chargers use switch mode technology, which minimizes energy waste by reducing high dissipation states. This allows the DLS-45/IQ4 to perform reliably and efficiently in a compact chassis with lower operating temperatures.

Features

• Optimal 4-Stage Charging
• Demand Sensing
• Reverse Polarity Protection
• Over Voltage Protected
• Short Circuit Protection
• Overload Protection
• Line Regulation
• Load Regulation
• Fan Control
• Thermal Protection
• 2 Years Warranty