The PowerMax PM3-100LK is a 12v 100 Amp charger converter power supply. The unit features a selector between 3-Stage Smart charging or Fixed Output Mode* for faster-charging needs.
The PM3 Series converters can accept a wide voltage input of 105 to 130 VAC. The unit weighs approximately 7.5 lbs and is an excellent option for RVs, radios, backup power supply needs, and smaller-sized pumps! Because of its high demand, the PM3 must be installed in a well-ventilated area where it will be safe from the environment.
Power Max has designed and built a powerhouse charger/converter using only the best in manufacturing technology. Capable of providing a constant load demand of up to 100% of its rated capacity, the PM3 series converters are among the best. Pumps, fans, motors, and radio equipment will run without problems on the PM3 converter/charger.
Note:
*The Fixed Output Mode does not offer smart charging and simply outputs at the fixed voltage. Users are highly recommended to use the 3-Stage charging mode for safe charging.
*The Fixed Output Mode does not offer smart charging and simply outputs at the fixed voltage. Users are recommended to use the 3-Stage charging mode for safe charging.
Features
Selectable 3-Step Charging Mode or Fixed Output Mode
Adjustable Voltage Dial
Variable Speed Cooling Fan
Demand Sensing
Reverse Polarity Protection
Over Voltage Protected
Short Circuit Protection
Overload Protection
Line Regulation
Load Regulation
Thermal Protection
2 Years Warranty
This Product Replaces These Other Products
Works In
Vehicles that PM3-100LK works in
Technical Specifications
Dimensions (LxWxH): 7.15 x 11 x 3.48 in
Weight: 7.45 lb
Output Amperage, Max Continuous: 100 A
Max Current, During Bulk Charge: 100 A
Output Voltage Full Load: 13.4 V
No Load Voltage: 13.6 V
Maximum AC Current @ 108 VAC: 17 A
AC Input Volts: 115 V
AC Input Volts Freq.: 47/63 Hz
AC Input Volts Range: 105–135 V
Float Current: Variable
Bulk Voltage: 14.6v ± 0.2v (default) / Adustable between 13v to 16.5v
Do you own the PM3-100LK? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.
★★★★★
Awsome
I use this converter to run a12 volt car audio test system in my house ,testing system builds as well as sub enclosure spl test before install so yes this PM3 100 is a must have
Is this review helpful?
Written byAntony on Jan 03, 2019.
— (39 of 51 customers found this review helpful)
★★★★★
good amp for powering a liner
i have had this for over 2 yrs and is powering my texas star 667v with no issues its well made has a series of fuses just incase things go wrong has a built it fan that comes on when needed the only con is it dose not have a power on-off switch but i added one and a voltage meter to it the voltage go's to 16v and has 100amps perfect the price is great too i would recommend this for your radio power equipment works as a charger if you want to do that as well quite versatile.
Is this review helpful?
Written bymichael on Apr 01, 2023.
Verified Purchase
— (2 of 2 customers found this review helpful)
★★★★★
works great
holds up just fine with my texas star 667v ham radio setup with room to spare i added a on/off switch and a volt meter now i can set the proper voltage with ease this is a verry good price for a 100amp power supply would recommend it.
Is this review helpful?
Written bymichael on Aug 14, 2022.
Verified Purchase
— (2 of 2 customers found this review helpful)
Write a ReviewDo you own the PM3-100LK? Please, tell us what you think about it.
It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.
Important Notice
